| Base Stations provide the wireless
communication channel between the Wireless Telephone
and the MCU. Each Base Station supports four simultaneous
telephone calls and covers a transmission area of
typically 25 to 45 thousand square feet. The size
of the coverage area is dependent on wall structure,
ceiling height, and other obstructions within a building. |
 |
A telephone call is passed
from one Base Station to another as a user walks throughout
the coverage area. The Link Wireless Telephone System
is designed to provide seamless coverage, enabling smooth
hand off of active calls.
Base Stations are
small, about the size of a
hardback book, and can be mounted under a drop ceiling or
on the wall. For outdoor installations, a weather proof enclosure
is available.
- Drop ceiling rails
- Wall Mount
- Weatherproof outdoor enclosure available
- 25,000 to 45,000 sq. ft. in typical office environment
- Can be located up to 6,000 ft. from Link 3000 MCU or
2,200 ft. from Link 150 MCU
- Supports high call density environments
- Enables ACD features through MCU digital interfaces
- Call centers
- Trading floors
- Wireless offices
- Emergency response & rapid deployment
- Conference centers & hospitality
The Link Wireless Telephone System allows more Base Stations within a concentrated area, increasing acall paths for high density environments.
The System can employ special High Density
Base Stations on the Link 3000 MCU to accomodate a high
concentration of active wireless telephone users. The capacity
of the Base Stations and Master Control Unit remains the
same, but the High Density Base Station transmission characteristics
allow for a much higher spatial density than the standard
Base Stations. The system is well suited for environments
where there are many workers with frequent telephone usage
within a relatively small area such as call centers, dense
office environments, and trading floors.
Link
WTS Brochure
Link
WTS Product Description
